Recent Coatings IQ Answers
Browse the latest commercial floor questions from Ottawa businesses.
Could a slippery kitchen floor in Gloucester break workplace rules?
Yes, a slippery kitchen floor in a commercial premises in Gloucester can break workplace rules. R.R.O. 1990, Reg. 851...
Can a warehouse floor in Kanata be done in phases?
Phased floor coating work in a warehouse is possible, but whether it suits your facility depends on the product chosen,...
What budget fits a grocery store back room floor near Ottawa?
Published 2025-2026 contractor ranges put a commercial-grade epoxy system at about $8 to $15 per square foot installed,...
Is my Ottawa floor quote too vague to sign?
A quote worth signing names the specific product system (primer, body coat, topcoat), the surface preparation method...
Will odour keep my Centretown office closed after coating?
Odour and closure time depend on which coating system the contractor proposes, and the data sheet for that product sets...
Shot blasting noise in an Ottawa office tower, what to expect?
Shot blasting in an office tower is loud, dusty and disruptive, and the scheduling and containment decisions matter as...
Why do Nepean floor quotes price crack repair separately?
Crack repair is priced separately because the scope and method cannot be known until the floor is inspected, and the...
Can an old warehouse floor in Bells Corners be polished?
Polishing an old warehouse floor in Bells Corners is possible, but whether the slab can actually be polished depends on...
Is epoxy slippery when wet in an Ottawa entrance?
A smooth, glossy epoxy finish and a wet entrance are a combination that Reg. 851 s.11 is written to address. The finish...
Why does my quote from a Kanata contractor list primer as its own price?
Primer is priced separately because it is a distinct product and a distinct step, and its cost depends on your slab's...
Our Kemptville equipment dealer floor, epoxy or sealer?
For a Kemptville equipment dealership, a commercial-grade epoxy coating is the more protective choice for a showroom or...
Which joints in a kitchen floor matter for Ottawa inspections?
O. Reg. 493/17, s.7(1)(c) requires that a food premise floor be "tight, smooth and non-absorbent" in rooms where food...
Are low-odour coatings safer for an Ottawa clinic?
"Low-odour" is a marketing description, not a safety classification. Whether a coating is safer for a clinic depends on...
Should moisture testing be a line item on my Ottawa floor quote?
Yes, moisture testing should appear as a named line item, and if it is buried in a general "prep" charge or missing...
Urethane cement for a Centretown kitchen, what price range?
Published 2025-2026 contractor ranges put urethane cement at or above premium epoxy, which runs about $8 to $15 per...
Polished concrete for an Ottawa warehouse: what does it cost?
Polished concrete on an existing warehouse slab runs about $3 to $15 per square foot installed, with most commercial...
Is $12 per square foot fair for a shop floor in Nepean?
At $12 per square foot, your quote sits in the middle of the about $8 to $15 per square foot installed that published...
What should a warehouse epoxy floor cost per square foot in Kanata?
About $8 to $15 per square foot installed: that is the published 2025-2026 contractor range for commercial and...
How much does a commercial epoxy floor cost in Ottawa?
Published 2025-2026 contractor ranges put commercial epoxy floors in Ottawa at about $8 to $15 per square foot...
Who handles used rags and waste after a coating job in Ontario?
Who handles used rags and waste should be written into your contract with the floor contractor, and Ontario law places...
Is a notice of project needed for a big Kanata floor job?
A notice of project is required under O. Reg. 213/91 s.6(1) when the total expected cost of labour and materials...
Who pays the coating supplier on a commercial floor job in Ontario?
Who pays the coating supplier depends on who buys the materials under your contract: if the contractor buys them, the...
Can a floor coating trigger allergies in an Orleans office?
Whether a floor coating product can cause a reaction depends on the product: some are classed as skin or respiratory...
Does a polished floor need a guard coat in an Ottawa mall?
A polished concrete floor does not automatically require a guard coat, but whether one belongs in a mall depends on the...
Can epoxy be patched in one aisle of a Nepean warehouse?
Whether one aisle of an existing epoxy floor in a Nepean warehouse can be patched, and whether the patch will hold and...
Do federal food rules cover my Kanata food plant floor?
Whether federal food rules govern your Kanata plant's floor depends on one question: does your establishment hold a...
Is it a bad sign if a contractor skips the moisture test in Kanata?
Skipping a moisture test before applying a resinous floor coating is a meaningful gap in the process, and it is worth...
What does Section 2 of a coating SDS tell an Ottawa manager?
Section 2 of a Safety Data Sheet sets out the product's hazards. For a floor coating job in an Ottawa commercial...
Why would an Ottawa contractor suggest MMA over epoxy?
A contractor may raise MMA (methyl methacrylate) when a facility cannot stay closed long enough for epoxy to cure, or...
Is a floor coating part of a change of use permit in Ottawa?
A floor coating on its own does not trigger a change of use permit. The Building Code Act s.10(1) requires a permit...
Weekend versus weekday floor work in an Orleans clinic?
Scheduling a floor coating in an occupied Orleans clinic comes down to two things: how long the data sheet says the...
Is polished concrete a good choice for an Ottawa church hall?
Whether polished concrete suits a church hall depends on how the hall is used and the slab you already have. Published...
Uneven slab in an Alta Vista clinic, levelling before coating?
Whether an uneven slab in your clinic can be levelled before coating, and with what, depends on how uneven it is, the...
Brewery floors in Hintonburg, which food rules matter?
For a Hintonburg brewery, the Ontario food premises rule is the one to check first, and a few workplace and building...
A tenant in Ottawa wants a new floor, what should the landlord ask?
A landlord whose commercial tenant is having a floor coating installed should treat the job as likely construction work...
What happens if old tile has asbestos in our Hunt Club unit?
If old tile or its black mastic adhesive in your Hunt Club unit may contain asbestos, have it tested before any...
Urethane cement over old quarry tile in a Centretown kitchen?
Whether urethane cement can go over quarry tile in a commercial kitchen depends on whether the tile is still firmly...
Is polished concrete a good floor for an Ottawa warehouse?
Whether polished concrete suits an Ottawa warehouse depends on the slab you already have and how the space is used....
Does grinding and prep add much to an Ottawa floor quote?
Surface preparation is a real cost line, not a formality. Published 2025-2026 contractor ranges put standard prep at...
Our Orleans clinic got a $15 per sq ft quote, is that high?
$15 per square foot sits at the top of the published 2025-2026 contractor range for commercial epoxy (about $8 to $15...
What drives the price of a restaurant kitchen floor in the Glebe?
Commercial epoxy for a kitchen runs roughly $8 to $15 per square foot installed in published 2025-2026 contractor...
Is polyaspartic more expensive than epoxy for Ottawa businesses?
Commercial epoxy runs about $8 to $15 per square foot installed and polyaspartic or polyurea commercial work about $6...
Why do two epoxy quotes for my Gloucester shop differ so much?
Two quotes for the same floor can be far apart even when both say "epoxy", because that word covers different systems,...
Roughly what would it cost to coat a 2,000 sq ft Westboro store?
For a 2,000 sq ft Westboro retail store, published 2025-2026 contractor ranges put a commercial epoxy system at roughly...
Change orders on a Kanata floor job, how should they work?
How change orders work on a commercial floor job in Kanata is set mostly by your contract, so get every scope change in...
Does urethane cement work in a freezer in Ottawa?
Urethane cement is marketed for freezers and cold storage, so whether it suits yours depends on the product's data...
Can a freezer stay cold while an MMA floor is installed in Ottawa?
One MMA (methyl methacrylate) brochure from 2010 says the system cures in about one hour and cures at temperatures down...
Our Barrhaven kitchen is closed Sunday to Tuesday, is that enough for a floor?
Whether three days is enough depends on the system chosen and what the data sheets say, not on the calendar alone. One...
Which grit level should an Ottawa restaurant ask for?
O. Reg. 493/17, s.7(1)(c) requires that a food premises floor be "tight, smooth and non-absorbent." The regulation does...
What surface profile does epoxy need on an Ottawa slab?
ICRI concrete surface profiles (CSP) are the scale contractors and data sheets use to describe how rough a slab needs...