Question 1

Should moisture testing be a line item on my Ottawa floor quote?

Accepted Answer

Yes, moisture testing should appear as a named line item, and if it is buried in a general "prep" charge or missing entirely, ask the contractor to break it out before you sign. Here is why it matters for your quote. ASTM F2170 (in-situ relative humidity probes) and ASTM F1869 (calcium chloride, measuring moisture vapour emission rate in pounds per 1,000 sq ft per 24 hours) are two different test methods, and one manufacturer's data sheet may call for one, the other, or both.

Question 2

Urethane cement for a Centretown kitchen, what price range?

Accepted Answer

Published 2025-2026 contractor ranges put urethane cement at or above premium epoxy, which runs about $8 to $15 per square foot installed. We found too few published Canadian prices to give a range for urethane cement itself, so expect quotes to vary with the factors below. For a commercial kitchen in Centretown, several things will move the number. Slab condition and the prep required to reach the surface profile the data sheet calls for are one factor.

Question 3

Polished concrete for an Ottawa warehouse: what does it cost?

Accepted Answer

Polished concrete on an existing warehouse slab runs about $3 to $15 per square foot installed, with most commercial jobs falling in the $5 to $12 per square foot range, based on published 2025-2026 contractor ranges. Your quote will differ. Several things move a warehouse quote within that range. The condition of the slab matters: cracks, spalling, old coatings or adhesive residue, and surface contamination all affect how much prep work is needed before grinding begins.

Question 4

Is $12 per square foot fair for a shop floor in Nepean?

Accepted Answer

At $12 per square foot, your quote sits in the middle of the about $8 to $15 per square foot installed that published 2025-2026 contractor ranges give for commercial and industrial-grade epoxy. Whether it is fair depends on what the quote actually includes. A few things shape where a shop floor lands in that range.

Question 5

What should a warehouse epoxy floor cost per square foot in Kanata?

Accepted Answer

About $8 to $15 per square foot installed: that is the published 2025-2026 contractor range for commercial and industrial-grade epoxy, with lighter commercial systems from about $5, and it is where a Kanata warehouse budget starts. Your quote will differ based on what your slab needs before a single drop of resin goes down. Several factors move a warehouse quote up or down.

Question 6

How much does a commercial epoxy floor cost in Ottawa?

Accepted Answer

Published 2025-2026 contractor ranges put commercial epoxy floors in Ottawa at about $8 to $15 per square foot installed for commercial and industrial-grade systems, with lighter commercial systems starting at around $5 per square foot. Your quote will differ based on what the slab and the facility actually need. Several factors move a quote up or down, and none of them rank neatly. Slab condition and the prep required to reach the right surface profile are one consideration.

Question 7

Does grinding and prep add much to an Ottawa floor quote?

Accepted Answer

Surface preparation is a real cost line, not a formality. Published 2025-2026 contractor ranges put standard prep at about $1 to $3 per square foot on top of the coating work when it is quoted separately, though some contractors bundle it into their system price, so the first thing to check is whether a quote includes prep or prices it as a separate line.

Question 8

Our Orleans clinic got a $15 per sq ft quote, is that high?

Accepted Answer

$15 per square foot sits at the top of the published 2025-2026 contractor range for commercial epoxy (about $8 to $15 per square foot installed), and within the range for polyaspartic and polyurea work (about $6 to $15 per square foot). So the number is not outside the market, but whether it reflects fair value for your clinic depends on what the quote actually includes. A few things can push a clinic floor toward the higher end of the range.

Question 9

What drives the price of a restaurant kitchen floor in the Glebe?

Accepted Answer

Commercial epoxy for a kitchen runs roughly $8 to $15 per square foot installed in published 2025-2026 contractor ranges, and urethane cement, which one coatings maker's article recommends for commercial kitchens, is priced at or above that premium epoxy range on published contractor pages. Your quote will differ based on what is actually on and under that slab. Several factors move the number, and none of them can be read from a photo. Slab condition and prep come first.

Question 10

Is polyaspartic more expensive than epoxy for Ottawa businesses?

Accepted Answer

Commercial epoxy runs about $8 to $15 per square foot installed and polyaspartic or polyurea commercial work about $6 to $15 in published 2025-2026 contractor ranges, so the ranges overlap and neither system is consistently more expensive than the other.

Question 11

Why do two epoxy quotes for my Gloucester shop differ so much?

Accepted Answer

Two quotes for the same floor can be far apart even when both say "epoxy", because that word covers different systems, coats and prep methods. Here is what is likely driving the gap in your Gloucester shop: - System and product: ask each contractor to name the product and send its data sheet. Published 2025-2026 contractor ranges run from about $5 per square foot for lighter commercial systems to about $15 per square foot for commercial and industrial-grade work.

Question 12

Roughly what would it cost to coat a 2,000 sq ft Westboro store?

Accepted Answer

For a 2,000 sq ft Westboro retail store, published 2025-2026 contractor ranges put a commercial epoxy system at roughly $8 to $15 per square foot installed; multiply by your floor area for a first budget. Lighter commercial systems start at about $5 per square foot. A polyaspartic or polyurea system runs about $6 to $15 per square foot installed, and polished concrete on an existing slab falls in the $3 to $15 range, with most commercial jobs landing around $5 to $12 per square foot.

Question 13

Can a contractor quote my Ottawa floor price without seeing the slab?

Accepted Answer

Without seeing the slab, a contractor can only estimate. Published 2025-2026 contractor ranges put commercial epoxy at about $8 to $15 per square foot installed (lighter systems from about $5), polyaspartic at about $6 to $15 and polished concrete at about $3 to $15, but where your job lands in those ranges depends on conditions that only a walk of the floor will reveal. Several things shift a quote significantly and cannot be assessed remotely.

Question 14

Can a small Barrhaven bakery afford a seamless floor?

Accepted Answer

For a small Barrhaven bakery, here is what published prices say about a seamless resinous floor. Published 2025-2026 contractor ranges put lighter commercial epoxy systems from about $5 per square foot installed, with full commercial and industrial-grade epoxy running about $8 to $15 per square foot. Standard surface prep, if quoted separately, runs about $1 to $3 per square foot extra; check whether your quote includes it.

Question 15

Budget for coating an auto repair bay in Stittsville?

Accepted Answer

Budget about $8 to $15 per square foot installed for commercial and industrial-grade epoxy in a Stittsville repair bay, going by published 2025-2026 contractor ranges; lighter commercial systems start from about $5 per square foot. Polyaspartic and polyurea systems for commercial work run about $6 to $15 per square foot installed. Standard surface prep, if not already included in the quote, is about $1 to $3 per square foot extra; check whether your quote bundles it.

Question 16

Non-slip floor for a seniors' residence kitchen in Ottawa, what budget?

Accepted Answer

For a seniors' residence kitchen in Ottawa, budget in the range of about $8 to $15 per square foot installed for a commercial epoxy system, about $6 to $15 per square foot for a polyaspartic system, while we found too few published prices to give a range for urethane cement. Surface prep, if quoted separately, adds roughly $1 to $3 per square foot on top of that. These are published 2025-2026 contractor ranges; your quote will differ based on the specifics of this kitchen.

Costs & Pricing